Adhesion Testers


PosiTest Manual Adhesion Tester by DeFelsko

POSITEST AT-M MANUAL ADHESION TESTER by DeFelsko measures coating adhesion on metal, wood, concrete, and other rigid substrates. The PosiTest Adhesion Tester features a digital display in psi or MPa, self-aligning dollies for accurate coating adhesion measurements on uneven surfaces, and a pull-rate indicator to ensure conformance to testing standards. The PosiTest AT-M comes with a rechargeable NiMH battery, and is rated for dust- and water-ingress protection at IP 65.

Four models to choose from:  20 mm dollies   50 mm dollies   50 x 50 mm Tile Kit   50 mm C1583 Kit

PosiTest Adhesion Tester conforms to ASTM D4541 and ISO 4624.


PosiTest AT-A Automatic Adhesion Tester by DeFelsko

POSITEST AT-A AUTOMATIC ADHESION TESTER from DeFelsko measures coatings adhesion on metal, wood, concrete, and other rigid substrates.
Four models to choose from: 20 mm dollies   50 mm dollies   50 x 50 mm Tile Kit   50 mm C1583 Kit

The PosiTest AT-A Automatic Adhesion Tester conforms to national and international standards for pull-off adhesion testing, including ASTM D4541/D7234 and ISO 4624/16276-1.


PosiSoft Solutions for DeFelsko Inspection Equipment

PosiSoft® Solutions - DeFelsko’s suite of FREE software solutions for their coatings inspection equipment:

PosiSoft® Desktop - for current PosiTector gauges (s/n 700000 and up) and PosiTest AT-A 

PosiSoft®3.0 - legacy desktop software for prior generations of  PosiTector  gauges (s/n lower than 700000) for PC or Mac

PosiSoft® USB - view, print, or download data, comparable to using a flash drive or mass storage device

PosiSoft®.net - manage your readings on “the cloud”

PosiTector App® - Mobile - connects PosiTector Advanced gauges, PosiTector SmartLink, and PosiTest AT-A via WIFI-enabled devices including tablets, smart phones


TQC CC1000 Cross-Cut Paint Adhesion Tester

The TQC CC1000 Cross Cut Adhesion Tester is used to test the adhesion of dry coats of paint on their substrate by means of two series of perpendicular cuts through the coating, then evaluating the adherence of the coating as compared to an adhesion classification chart. The CC1000 Cross Hatch Cutter features a rotating blade with eight cutting edges of the same tooth-spacing, giving longer use from a single cutting knife.


Cross Hatch Cutter

The Gardco PA2000 CROSS HATCH CUTTER Paint Adhesion Test Kit includes all items necessary for testing coating adhesion up to 5 mils thickness on flat surfaces. Cross Hatch Cutter testing conforms to ASTM D3359, Test Method A for Coating Adhesion Testing.


TQC BD2000 Cylindrical Mandrel Bend Test Kit

TQC BD2000 Cylindrical Mandrel Bend Tester consists of a sturdy bending apparatus and a set of 14 cylindrical mandrels of diameters ranging from 2 to 32 mm. Mandrel Bend Testing is used to assess cured coatings on metal panels for resistance to deformation, and for flexibility.


Temper II Cross Hatch Template

Gardco's TEMPER II CROSS HATCH TEMPLATE features all the standard cross-cut spacings on one stainless-steel template. Test paint adhesion according to ASTM D 3359 Test Method B for Coating Adhesion Testing with Temper II Cross Hatch Template.


TQC CC3000 Adjustable Cross Cut Paint Adhesion Tester

The CC3000 Adjustable TQC Cross-Cut Adhesion Tester enables the coatings inspector or paint contractor determine the quality of adhesion of cured coatings to the surfaces to which they have been applied. Available in 5 cutter options, CC3000 Cross-Hatch Adhesion Cutter can be purchased alone, or in a kit with a 2.5 X lighted magnifier, brush, and a roll of adhesive tape conformable to either ISO 2409 or ASTM D3359 standards for testing of coating adhesion by cross-cut testing or adhesion tape testing.

Home | About | New Products | FAQS | Tech Articles | Contact | Terms
Stone Tucker Inc. | Phone: 905-688-5800 | Email:
Copyright 2011 Stone Tucker Instruments Inc. | Niagara Website Design by Future Access Inc.