James-Manual-rebound-hammer-421.jpg

James NDT W-M-250 Manual Concrete Test Hammer


Manual Concrete Test Hammers are the traditional instruments used for the non-destructive testing of hardened concrete. James NDT W-M-250 Manual Rebound Concrete Hammers are easy-to-use instruments that provide immediate indication of concrete strength in various parts of a structure. The minimum verifiable strength is 1400 PSI (10 MPa) to approximately 9000 PSI (62 MPa). All concrete test hammers measure the surface hardness of the material they are testing; which is correlated to concrete compressive strength.

 

The manual concrete test hammer, also known as a Rebound Hammer, Schmidt Hammer, Swiss Hammer, or sclerometer, is the most widely-used non-destructive instrument for compressive strength determination. However, it typically has the largest coefficient of variation; therefore its result should be verified with another non-destructive test such as the V-Meter MK IV.

All James Concrete Test Hammers conform to ASTM C-805*, BS-1881 #202 and other international standards.

* Standard Test Method for Rebound Number of Hardened Concrete

 

Features of the James Manual Concrete Test Hammer

  • Easy-to-use manual calculation of the mean rebound number.
  •  Impact Energy level of 1.6 ft. lbs. (0.225 kgm / 2.2 Nm) and come complete with carrying case and carborundum stone.
  • The minimum verifiable strength is 1400 PSI (10 MPa)

 

It is recommended that calibration of the test hammers be checked regularly
- usually after about 2000 strokes.
The James Calibration Anvil (W-C-7312) has been designed
for just that purpose.

 

 

 

Please click to view the James Type-L Low-Impact Manual Rebound Test Hammer testing thinner concrete structures (~2 - 4"), brittle rock or rock cores, masonry, and paper rolls or films.

 

Available Models:

W-M-250 Manual 250 Rebound Hammer

Optional Accessories:

W-C 7312 Test Anvil

 

Home | About | New Products | FAQS | Tech Articles | Contact | Terms
Stone Tucker Inc. | Phone: 905-688-5800 | Email: info@stone-tucker.com
Copyright 2011 Stone Tucker Instruments Inc. | Niagara Website Design by Future Access Inc.