Amine Blush Test Kit
The KnowAmineBlush AMINE BLUSH TEST KIT contains everything needed to test for amine blush on coated surfaces cured in low temperature or high humidity environments.
Amine Blush can occur during the curing of epoxy coatings reacting to the humidity in the environment. Amine Blush is not always visible, but can cause inter-coating failures if not detected and cleaned off prior to application of subsequent coating layers.
The KAB Amine Blush Test Kit is Easy to Use:
Spray the Amine Blush Test solution onto a piece of filter paper and apply to coated surface. Check for colour change; test paper will immediately turn blue if amine is present. After test, flush surface with clean, fresh water.
Each kit is suitable for 75+ tests.
Each Amine Blush Test Kit comes with:
Amine Blush Test solution
Test Filter Paper
Sealable Sample Bags
Protective Gloves
small bottle of amine solution to verify negative test results |
